Digital self standing depth gauge with magnetic fastening G0181105-80

Product Code: G0181105-80
In Stock
Price: $22.90

Digital depth gauge G0181105-80 is self standing with magnetic feet, allowing for more precise and convenient measurement and adjustment. It's very useful when setting the cutting height for cutting and trimming machines. Thus is achieved high cutting precision, so measuring instruments of this type are widely used in woodworking, furniture making, metalworking, and so on.

The digital depth gauge enable  accurate measurement of horizontal and vertical surfaces. Equipped with its own tripod with built-in magnets, which, combined with its flat back, makes it widely applicable for setting the depth of various materials - metal, wood and more.

Horizontal and vertical measurement is achieved by a steel rule scale with a locking screw for precise adjustment of the cutting machines. A removable pin is also available to measure the depth of the holes in a range of 50.8 mm or 2 inches. Digital depth gauge G0181105-80 is equipped with an LCD reader for various measuring and marking systems - metric, empirical and fractional. The steel measuring rule also uses the metric and imperial scales.

Digital jaw diameter is 60 mm with measuring range up to 80 mm, the results being accurate to +/- 0.1%. A digital LCD display allows the good visibility of settings and measurement. The maximum rate of measurement is 1.5 meters per second or 60 inches per second on the scale with a repeatability of 0.05 mm or 0.002 inches.

The digital self standing depth gauge G0181105-80 comes complete with everything you need for its trouble-free operation, including a 3V CR2032 battery and a removable pin. It is an easily portable electronic meter belonging to micrometer measuring devices whose operation is based on a micrometer screw-nut pair.

Given its low cost and compact dimensions, its use creates incredible convenience in various areas related to metal and woodworking through cutting and milling machines.


  • Horizontal and vertical measurement
  • For hand and table routers
  • Width of hole 60 mm / jaw
  • Exactly ± 0.1 mm with a resolution of 0.05 mm or 0.002 inches
  • Measuring range: 80 mm or 3 1/8 inches
  • Steel rule with double metric and imperative scale with lock screw
  • Digital display for easy reading
  • Stand-alone for table router depth adjustment and low profile adjustment for the backfence


  • Measuring range: 80 mm; 3 1/8 inch
  • Resolution: 0.05 mm / 0.002 inch
  • Accuracy: 0.10 mm / 0.004 inches (<100 mm)
  • Repeatability: 0.05 mm / 0.002 inches
  • Maximum measurement speed: 1.5 m / sec, 60 inches / sec
  • Power supply: 1 x 3V CR2032 battery (included)
  • Size: 143 x 110 x 22 mm
  • Weight: 93 grams (including battery)

The set includes:

  • 1 x Digital self-contained device with magnetic fastener / depth gauge
  • 1 x removable pin
  • 1 x 3V CR2032 flat battery
  • Blister pack
Reviews (0)

Write a review

Note: HTML is not translated!

Bad            Good

Related Products