The non-contact voltmeter N03NF-608 x 2 is a compact measuring instrument that can be especially useful for any professional or DIY electrician. It serves to measure the voltage across conductors in order to detect the break point with great accuracy.
The appliance can help locate problems with hot cables in the network. With its help, the breakpoint can be detected by tracing the entire conductor to the point where the voltage is interrupted. The Voltmeter N03NF-608 x 2 has tone and LED indicator, which is triggered automatically and simultaneously at the location of an alternating current in the electrical conductor.
Extremely suitable for measuring voltage in permanently connected machines, building electrical installations, transformers and other equipment belonging to the mains. The voltmeter has the ability to detect AC voltage in the range of 50 ~ 1000V, and the ability to measure the frequency in the 50 ~ 500Hz range.
The appliance is intended for indoor use only and the environment must meet the following conditions: Temperature: 0 ° C to 40 ° C; Relative humidity (no condensation): less than 80%; Altitude: maximum 2000 - 6500 m; Measurement category: 1V, 1000V for UL 61010 and pollution degree: 2. Voltage detector N03NF-608 x 2 works with 2 1.5V AAA batteries.
Direction of use: Slide the appliance through the wire until the tone light indicates the place of power failure. Connect a load between the hot and neutral trace the wire to stop the signal.
The set contains: